Connect-tech BLUESTORM UNIVERSAL PCI CTIM-00015 Manuale Utente Scaricare il pdf (Pagina 21)

BlueStorm Installation Guide, Connect Tech Inc.

Revision 0.08 21

Table 8: RJ-11 Pinouts for BlueStorm/SP RJ-11 (ports 7 and 8 only)

Pin No. RS-232 Direction

1 DCD input

2 DSR input

3 RxD input

4 RTS output

5 TxD output

6 CTS input

7 DTR output

8 RI input

9 SG signal gnd.

10 N/C no connect

P7/P8

Please note that ports 7 and 8 are not accessible through the factory installed bracket.

Table 9: Pinouts and Control Signals for RJ-11 Connectors (BlueStorm/SP RJ-11 only)

Ports 7 and 8 when a DB-9 cable

(part number CAG104K) is attached

Ports 1 through 6, which are accessible

through the factory installed bracket

DB-9

Pin No.

RS-232

Signal

Direction

RJ-11

Pin No.

RS-232

Signal

Direction

1 DCD input 1 RTS output

2 RxD input 2 RxD input

3 TxD output 3 TxD output

4 DTR output 4 DSR input

5 SG signal ground

6 DSR input

5 SG Signal/power

ground

7 RTS output

8 CTS input

6 +12 VDC**

or +5 VDC**

output

9 RI input ** J1 selects +5 VDC, J2 selects +12 VDC

Part #: CAG104K

Technical Tip:

Please ensure that you terminate the CTS signal if your application does

not use them. The common way to do this is to connect CTS to RTS.

Failure to do so may result in loss of a performance on your

BlueStorm/SP RJ-11 adapter.

Male DB-9 Connector

RJ-11 Connector

1 2 ... 16 17 18 19 20 21 22 23 24 25

Commenti su questo manuale

Nessun commento

Connect-tech BLUESTORM UNIVERSAL PCI CTIM-00015 Manuale Utente Pagina 21

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Connect-tech BLUESTORM UNIVERSAL PCI CTIM-00015